Archive

Posts Tagged ‘gt-wing’

Aeromotions Set to Launch New Ultra Performance Wing for Ultra Performing GT-Rs

May 17th, 2010

Demand for tougher aero that can stand up to the challenge of faster and faster GT-Rs is growing it seems so the active downforce pioneers over at Aeromotions have stepped up to the plate. They’ve gone back and tweaked the carbon blade on their R2 line of static and active wings for added strength.

Not only that but they’ve also been doing their homework when it comes to mounting the new version of the R2 wing. It now will mount in the standard wing’s location and cover the standard wing’s mounting with the plate feet. While you will have to drill a new hole on each side to properly fit the wing, this hole will also be covered up by the OEM wing should you have the need to swap back. Very neat and way better than swapping out the entire trunk lid or something. The R2.TWO dynamic wing also gets updates to the control system to make it simpler to mount.

The static R2, even this tougher better version, will continue to sell for just $1,699, check out the Aeromotions website for more info, linked below…

Link: Aeromotions Website

1 comment

Motor Racing, Parts / Manufacturers, Tuner News , , , , , , , ,

Esprit Dry Carbon Wing for Nissan GT-R: Wing 052

April 19th, 2010

Esprit are well known for their past creative rear wing design for the Nissan GT-R – the GT Wing 262. You’ve seen it on the ‘blog before but for those who need a refresher you can see our photo gallery here. This week they released their latest update to their carbon parts catalog, the Wing 052 for the R35 GT-R.

Quite a striking design, one of these babies will set you back around 325,000 yen in Japan.

Link: Esprit Website (Japanese)

1 comment

Esprit, Parts / Manufacturers, Tuner News , , , , , , , , , , ,

C-West Full Carbon GT-Wing for Nissan GT-R Released

December 1st, 2009

20091201-CWEST-04

Previewed earlier in the year, C-West have now rolled out the new full dry carbon GT-Wing for the Nissan GT-R for sale. Designed for high speed circuit applications, the wing is extremely lightweight and strong owing to it’s carbon honeycomb construction. The wing is also easily adjusted by way of the set pins on each end cap.

While this wing design is their high-speed downforce model, a second model offering more downforce, albeit with more drag, is planned for early next year.

High end wings like this don’t come cheap and price of admission is 682,500 yen in Japan. Expect a delivery 30 – 40 days after ordering as they’re made to order.

Source: C-West Website via GTR-World.net

20091201-CWEST-05

Comments Off on C-West Full Carbon GT-Wing for Nissan GT-R Released

C-West, Parts / Manufacturers , , , , , ,

HKS Technical Factory Spoiler High Mount Kit for Nissan GT-R

August 19th, 2009

hks-tf-hm-003

Here’s something creative for those after a little something more for their track GT-R without going to the extravagance of a full blown picnic bench GT wing. HKS TF have devised a pair of handy spoiler risers that lift the rear wing up that extra couple of inches. This allows you to get that extra downforce while utilising practically all your factory hardware and retain the center brake light.

Supplied in the kit are the two risers and a center pillar manufactured in FRP. Cost is 72,450 yen in Japan but you’ll likely need to have them painted to suit.

Link: HKS Technical Factory Website

2 comments

HKS, Parts / Manufacturers, Tuner News , , , , , , , ,

SARD Release GT-Wing Range for Nissan R35 GT-R

April 5th, 2009

SARD GT-Wing FUJI SpecM for Nissan GT-R

Japanese motorsports part manufacturer SARD has updated their aero parts lineup to include two new GT-Wings suitable for the Nissan GT-R. The GT-Wing Fuji Spec M and the GT-Wing Pro have both been released for the GT-R owner interested in upgrading the on-track performance of their base GT-R.

Both of these wings are a 1,710mm wide, carbon fibre units with 5 steps of adjustability. The Fuji Spec M item (pictured here) offers a low drag high downforce design in a standard shaped wing while the Pro version has the lifted center to offer maximum rear downforce. As an option carbon kevlar and carbon twill weave wing elements are available over the standard carbon item.

Pricing ranges from 192,150 yen for the carbon GT-Wing Fuji SpecM (part code 61810C(B)) up to 210,000 yen for the carbon kevlar GT-Wing Pro (part code 61700K(B)).

Link: SARD GT-Wings Website
Link: SARD Website

Comments Off on SARD Release GT-Wing Range for Nissan R35 GT-R

Parts / Manufacturers, SARD , , , , , , , , ,